5 Tips To Make Your Packing Machines Have A Longer Service Life!

For liquid  packaging machine
The liquid  machine is not only suitable for packing free fluids with low viscosity, such as: wine, non-carbonated beverages, fruit juice, fresh milk, soy sauce, vinegar and edible oil, but also suitable for packing various viscous seasoning sauce, such as jam and noodle sauce.
Because of the wide variety of liquid products, the maintenance requirements of the Liquid Packaging Machine are also relatively higher.
Remember the following 5 tips to make your liquid packaging machine last longer!

(1) Any abnormal phenomenon found during work of liquid packaging machine, the power supply should be cut off immediately, and the abnormality should be corrected before continuing to use.

(2) Check the parts and lubrication of the liquid packaging machine, keep the parts lubricated and prolong the service life, otherwise the service life will be shortened;

(3) Check the horizontal heat-sealed copper block. If there is foreign matter on the surface, clean it up in time, otherwise it will cause the conductivity to drop;

(4) If the liquid packaging machine is out of use, the residue in the pipeline should be rinsed with clean water in time to keep the pipeline clean to ensure the packaging quality when it is used next time;

(5) In Winter, if the temperature is lower than 0°C, hot water is needed to melt the ice in the metering pump and pipeline. If it does not melt, the connecting rod may break and become unusable, or the machine may not start.

For Granule  packaging machine
As we all know, the granule  packaging machine is a kind of equipment with a unique purpose, and it has important applications in the fields of medical equipment, food packaging materials, etc.

1) Refuel regularly to prevent the parts from wearing due to excessive friction. If there is a lack of lubricating oil in the closely contacted parts, it should be refilled in time, and the secondary parts should be protected as much as possible.

2) Regularly check spare parts like worm gear, gear mechanism, bearing and other movable parts to ensure they can work normally. 

3) Ensure the normal working environment and avoid corrosive gas from damaging the machine. Clean the packaging materials on the packaging machine in time to ensure that there is no interference between one product to another product. It is to ensure the cleanliness and sanitation of the filling mechanism and protect the filling mechanism.

4) Maintenance points of  Granule Packaging Machine: cleaning, tightening, adjustment, lubrication, and corrosion protection.

5) In the normal production process, all mechanical maintenance personnel should strictly abide by the maintenance manual and maintenance procedures of the mechanical packaging equipment, and perform maintenance operations within the specified time